Print Settings; Setup Menu - Lexmark X548 Series User Manual

Separator Sheets
Off
Between Copies
Between Jobs
Between Pages
Separator Sheet Source
Tray [x]
Manual Feeder
Blank Pages
Do Not Print
Print

Print Settings

Setup menu

Menu item
Printer Language
PCL Emulation
PS Emulation
Job Waiting
Off
On
Specifies whether blank separator sheets are inserted
Notes:
•
Off is the factory default setting.
•
Between Copies inserts a blank sheet between each copy of a print job if Collate is set to On.
If Collate is set to Off, then a blank page is inserted between each set of printed pages, such
as after all page 1's and after all page 2's.
•
Between Jobs inserts a blank sheet between print jobs.
•
Between Pages inserts a blank sheet between each page of the print job. This setting is useful
when printing transparencies or when inserting blank pages in a document for notes.
Specifies the paper source for separator sheets
Notes:
•
Tray 1 is the factory default setting.
•
From the Paper menu, Configure MP must be set to Cassette in order for Manual Feeder to
appear as a menu setting.
Specifies whether blank pages are inserted in a print job
Note: Do Not Print is the factory default setting.
Understanding printer menus
Description
Sets the default printer language
Notes:
•
PCL Emulation is the factory default printer language.
•
Setting a printer language as the default does not prevent a
software program from sending print jobs that use another
printer language.
Specifies that print jobs be removed from the print queue if they
require unavailable printer options or custom settings. They are
stored in a separate print queue, so other jobs print normally. When
the missing information and/or options are obtained, the stored
jobs print.
Notes:
•
Off is the factory default setting.
•
This menu appears only when a non-read-only printer hard disk
is installed. This requirement ensures that stored jobs are not
deleted if the printer loses power.
187