Lexmark X548 Series User Manual page 181

Menu item
Color Dropout
Color Dropout
None
Red
Green
Blue
Default Red Threshold
0–255
Default Green Threshold
0–255
Default Blue Threshold
0–255
Contrast
0–5
Best for content
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
-4 to 4
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
-4 to 4
Description
Specifies which color to drop during scanning, and how much to increase or decrease
the dropout
Notes:
•
None is the factory default setting for Color Dropout.
•
128 is the factory default setting for each color threshold.
Specifies the contrast of the output
Note: "Best for content" is the factory default setting.
Creates a mirror image of the original document
Note: Off is the factory default setting.
Creates a negative image of the original document
Note: Off is the factory default setting.
Adjusts the amount of shadow detail visible on a scanned image
Note: 0 is the factory default setting.
Specifies whether the original document is scanned edge-to-edge
Note: Off is the factory default setting.
Adjusts the amount of sharpness of a scanned image
Note: 3 is the factory default setting.
Enables the user to specify "warm" or "cool" outputs. "Cool" values generate a bluer
output than the default while "warm" values generate a redder output than the
default.
Understanding printer menus
181