Solving Copy Problems; Large Jobs Do Not Collate; Copier Does Not Respond - Lexmark X548 Series User Manual

U P S
SE THE SAME APER
•
Print a menu settings page and compare the settings for each tray.
•
If necessary, adjust the settings from the Paper Size/Type menu.

Large jobs do not collate

These are possible solutions. Try one or more of the following:
M C
AKE SURE OLLATE IS SET TO
From the printer control panel Finishing menu, Print Properties, or the Print dialog, set Collate to On.
Note: Setting Collate to Off in the software overrides the setting in the Finishing menu.
R
EDUCE THE COMPLEXITY OF THE PRINT JOB
Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of
images, and the number of pages in the job.
M
AKE SURE THE PRINTER HAS ENOUGH MEMORY
Add printer memory.
Unexpected page breaks occur
I P T
NCREASE THE RINT IMEOUT VALUE
1
From the home screen, navigate to:
> Settings > General Settings > Timeouts
2
Touch the left or right arrow next to Print Timeout until the desired value appears.
3
Touch Submit.

Solving copy problems

Copier does not respond

These are possible solutions. Try one or more of the following:
C
HECK THE DISPLAY FOR ERROR MESSAGES
Clear any error messages.
C
HECK THE POWER
Make sure the printer is plugged in, the power is on, and Ready appears.
P T
IZE AND APER YPE SETTINGS
O
N
Troubleshooting
255