Avoid paper jams
Correctly set the paper type and size to avoid paper jams. For more information, see "Avoiding jams" on page 232.
Saving energy
Using Eco-Mode
1
Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
•
View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
•
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
2
Click Settings > General Settings > Eco-Mode > select a setting > Submit.
Choose
To
Off
Use factory default settings for all settings associated with Eco-Mode. This setting supports the performance
specifications of your printer.
Energy
Reduce energy use, especially when the printer is idle.
•
Printer engine motors do not start until it is ready to print. You may notice a short delay before the first
page is printed.
•
The printer enters Sleep mode after one minute of inactivity.
•
When the printer enters Sleep mode, the printer control panel display and the standard exit bin lights
are turned off.
•
If scanning is supported, the scanner lamps are activated only when a scan job is started.
Energy/Paper Use all the settings associated with Energy mode and Paper mode.
Paper
•
Enable the automatic duplex feature.
•
Turn off print log features.
Reducing printer noise
To select a Quiet Mode setting using the Embedded Web Server:
1
Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
•
View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
•
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
2
Click Settings > General Settings > Quiet Mode > select a setting > Submit.
Minimizing your printer's environmental impact
47