Installation Procedure; Removing Tapes And Retainers - Ricoh B064 Service Manual

MAIN MACHINE (B064 SERIES/B140 SERIES)

1.2.2 INSTALLATION PROCEDURE

Removing Tapes and Retainers


CAUTION
To avoid serious injury, do not connect the power plug to the machine until
you are instructed to do so.
[A]
[B]
1. Unpack the machine and remove all the wrapping.
2. Remove all filament tape from the front [A] of the machine.
NOTE: Ensure that you save the "Birth Certificate" document that is located on
the platen glass. This document lists the machine serial, ROM version,
and original setup adjustments. Keep this document either near/in the
machine, or in another safe location.
3. Open the lower tray [B] and remove the operating instructions holder and foot
risers.
4. Open the ADF feed cover and remove the tape and retainer [C].
5. Remove the tape from the back [D] of the machine.
NOTE: Save the filament tape and shipping retainers to prepare the machine
for shipping in the future.
B064 Series/B140 Series/G126
[C]
[D]
B140I403.WMF
1-8
B064I404.WMF
SM