Ricoh B064 Service Manual page 620

ADF (B140 SERIES/B064 SERIES ONLY)
Changing the Default Selection with SP6016 and SP5126
Here is a list of paper sizes that can be set for the default to enable detection. The
bold sizes are the default settings, and the italic sizes are the alternate settings.
North America
64 DL SEF
32 LT LEF
16 LT SEF
8 LG SEF
To change the default settings:
1. Enter the SP mode.
2. Select SP6016.
3. Replace the default settings with the alternate settings.
• In North America, enter 120 to replace the default settings with the alternate
settings. The bold settings in the table above are replaced with the italicized
settings.
• In Europe (or Asia), enter 7 to replace the default settings with the alternate
settings. The bold settings in the table above are replaced with the italicized
settings.
4. To restore all the default settings in either North America or Europe/Asia, enter
"0".
SP 5126
This SP controls the alternative paper sizes that are detected for LG SEF (USA) or
8 ½ x 13" (Europe/Asia).
B064 Series/B140 Series/G126
11" x 15"
Exec LEF
8" x 10" SEF
Set by SP 5126
6-22
Europe/Asia
4 8 K
2 16 K SEF
1 16 K LEF
DL SEF
LT SEF
LT LEF
SM