Ricoh B064 Service Manual page 520

SERVICE PROGRAM MODE TABLES
7816* Copy Counter Reset (B064 only)
001 Tray 1 (Tandem Tray)
002 Tray 2
003 Tray 3
004 Tray 4 Japan Only
005 LCT
006 By-pass
7817* ADF Counter Reset (B064 only)
7822 Copy Counter Rest – Magnification
(B064 only)
7825 Total Counter Reset (B064 only)
Resets the electronic counter total. Normally, this SP is executed at installation.
7826* MF Error Counter
Displays the number of counts requested of the card/key counter. Japan Only
001* Error Total
002* Error Staple
7827 MF Error Counter Clear
Press Execute to reset to 0 the values of SP7826. Japan Only
7832 Self-Diagnostic Report Details
Press # to display a list of error codes. Nothing is displayed if no errors have
occurred.
7834 Clear Pixel Coverage Data DFU
001
Last & Average pages
002 Toner Bottle in Use
003 Page Counts (2 Prev. Toner Bottles)
004 Clear Pixel Data Coverage
7836 Total Memory Size
Displays the contents of the memory on the controller board.
7837 Copy Clear: Pages by Mode (B064 only)
Press Execute to clear counter SP7304 (Copy Num – Copies by Mode)
7838 Copy Clear: Jobs by Count Continuous (B064 only)
Press Execute to clear counter SP7305 (Copy: Display Jobs by Mode)
7839 Copy Clear: Jobs by Mode (B064 only)
Press Execute to clear counter SP7306 (Copy: Display Jobs by Mode).
7840 LS Clear: Stored Image Logins (B064 only)
Press Execute to clear counter SP7320 (Doc. Svr. – Scan Count.
7841 LS Clear: Originals by Size (B064 only)
Press Execute to clear counter SP7321 (Doc. Svr. – Original Size Display)
B064 Series/B140 Series/G126
Resets the total feed count for each feed station.
Resets the counters of SP7205
Resets all counters of SP7301.
A request for the count total failed at power on. This error
will occur if the device is installed but disconnected.
The request for a staple count failed at power on. This error
will occur if the device is installed but disconnected.
5-118 SM