Image Quality Sp Adjustments; Custom Settings For Each Mode: Image Quality - Ricoh B064 Service Manual

IMAGE PROCESSING

6.6.4 IMAGE QUALITY SP ADJUSTMENTS

Adjustments are easier with this machine, because the parameters have been
grouped and no longer have to be adjusted one by one.
In this section, we will cover the custom settings for each of the 5 original modes:
These custom settings are:
• Image Quality
• Line Width Correction
• Duplex Scanning Mode
Settings adjustable for each original mode will also be covered (these do not just
affect the custom settings; they also affect all sub original modes, such as sharp
text).
• Independent Dot Erase
• Background Erase
Note concerning Photo Mode: There are two sets of custom settings for photo
mode. One is for dithering, and one is for error diffusion. The set of custom settings
that will be used depends on the setting of SP 4904 002.

Custom Settings for Each Mode: Image Quality

Custom Setting: Text Mode Image Quality
Item
Text 25~55%
55.5~75%
75.5~160%
160.5~400%
If the value is increased, the outlines of lines become sharper but this could cause
moiré to appear in dot patterns. If the value is decreased, image patterns become
smoother, the occurrence of moiré decreases, but the corners of characters and
intersections of lines at acute angles may not be as sharp.
Custom Setting: Photo Mode (Dithering) Image Quality
Item
Photo 25~55%
55.5~75%
75.5~160%
160.5~400%
Used for coarse, dithered tone photographs such as newsprint.
If the value is increased, the photo becomes sharper, but blurring could occur in
the sub scan direction. If the value is decreased, blurring in the sub scan direction
is less obvious but outlines become fuzzy.
B064 Series/B140 Series/G126
Range Default
0~10 5 Normal
Range Default
0~6 3 Print Photo
6-34
SP No.
SP4903-001
SP4903-002
SP4903-003
SP4903-004
SP No.
SP4903-005
SP4903-006
SP4903-007
SP4903-008
SM