Add Routes For Vpn Tunnel Clients - NETGEAR ProSafe FVS318N Reference Manual
Wireless-n 8-port gigabit vpn firewall
Hide thumbs
Also See for ProSafe FVS318N:
- Reference manual (425 pages) ,
- Cli reference manual (297 pages) ,
- User manual (17 pages)
Table of Contents
Advertisement
Table 67. SSL VPN Client screen settings for IPv4 and IPv6 (continued)
Setting
IPv4 screen only
IPv6 screen only
4.
Click Apply to save your settings. VPN tunnel clients are now able to connect to the wireless
VPN firewall and receive a virtual IP address in the client address range.
Add Routes for VPN Tunnel Clients
The VPN tunnel clients assume that the following networks are located across the
VPN-over-SSL tunnel:
•
The subnet that contains the client IP address (that is, PPP interface), as determined by
the class of the address (Class A, B, or C).
•
Subnets that are specified in the Configured Client Routes table on the SSL VPN Client
screen.
If the assigned client IP address range is in a different subnet from the local network, or if the
local network has multiple subnets, or if you select split-tunnel operation, you need to define
client routes.
To add an SSL VPN tunnel client route:
1.
Select VPN > SSL VPN > SSL VPN Client. The SSL VPN Client screen for IPv4
displays (see
Figure 164
2.
Specify the IP version for which you want to add a route:
•
IPv4. In the upper right of the screen, the IPv4 radio button is already selected by
default. Go to
•
IPv6. Select the IPv6 radio button. The SSL VPN Client screen displays the IPv6
settings (see
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Description
Client Address
Range Begin
Client Address
Range End
Client IPv6
Address Range
Begin
Client IPv6
Address Range
End
on page 270).
Step
3.
Figure 165
on page 271).
Virtual Private Networking Using SSL Connections
The first IP address of the IPv4 address range that you
want to assign to the VPN tunnel clients. By default, the
first IPv4 address is 192.168.251.1.
The last IP address of the IPv4 address range that you
want to assign to the VPN tunnel clients. By default, the
last IPv4 address is 192.168.251.254.
The first IP address of the IPv6 address range that you
want to assign to the VPN tunnel clients. By default, the
first IPv6 address is 4000::1.
The last IP address of the IPv6 address range that you
want to assign to the VPN tunnel clients. By default, the
last IPv6 address is 4000::200.
272
Advertisement
Table of Contents
Troubleshooting
