NETGEAR ProSafe FVS318N Reference Manual page 157

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 80.
IPv4 LAN WAN or IPv4 DMZ WAN Inbound Rule: Set Up One-to-One NAT
Mapping
In this example, multi-NAT is configured to support multiple public IP addresses on one WAN
interface. An inbound rule configures the wireless VPN firewall to host an additional public IP
address and associate this address with a web server on the LAN.
The following addressing scheme is used to illustrate this procedure:
• NETGEAR wireless VPN firewall:
- WAN IP address. 10.1.0.118
- LAN IP address subnet. 192.168.1.1 with subnet 255.255.255.0
- DMZ IP address subnet. 192.168.10.1 with subnet 255.255.255.0
• Web server computer on the wireless VPN firewall's LAN:
- LAN IP address. 192.168.1.2
- DMZ IP address. 192.168.10.2
- Access to web server is (simulated) public IP address. 10.1.0.52
Firewall Protection
157