NETGEAR ProSafe FVS318N Reference Manual page 219


To delete one or more IKE polices:
1. Select the check box to the left of each policy that you want to delete, or click the Select
All table button to select all IKE policies.
2. Click the Delete table button.
For information about how to add or edit an IKE policy, see
Policy on page 219.
Note: You cannot delete or edit an IKE policy for which the VPN policy is
active without first disabling or deleting the VPN policy.
Manually Add or Edit an IKE Policy

To manually add an IKE policy for IPv4 or IPv6:
1. Select VPN > IPSec VPN. The IPSec VPN submenu tabs display with the IKE Policies
screen for IPv4 in view (see
2. Under the List of IKE Policies table, click the Add table button. The Add IKE Policy screen
displays the IPv4 settings (see the next screen).
3. Specify the IP version for which you want to add an IKE policy:
• IPv4. In the upper right of the screen, the IPv4 radio button is already selected by
default. Go to
• IPv6. Select the IPv6 radio button. The Add IKE Policy screen for IPv6 displays. This
screen is identical to the Add IKE Policy screen for IPv4 (see the next screen).
Virtual Private Networking Using IPSec and L2TP Connections
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 137
Step 4.
Manually Add or Edit an IKE
on page 218).
219