NETGEAR ProSafe FVS318N Reference Manual page 75

Figure 37.
2. Enter the settings as explained in the following table:
Table 13. LAN IPv6 Config screen settings
Setting
Start IPv6 Address
End IPv6 Address
Prefix Length
3. Click Apply to save your changes and add the new IPv6 address pool to the List of IPv6
Address Pools table on the LAN Setup screen for IPv6.

To edit an IPv6 LAN address pool:
1. On the LAN Setup screen for IPv6 (see
the Action column for the address pool that you want to modify. The LAN IPv6 Config
screen displays.
2. Modify the settings as explained in the previous table.
3. Click Apply to save your settings.

To delete one or more IPv6 LAN address pools:
1. On the LAN Setup screen for IPv6 (see
the left of each address pool that you want to delete, or click the Select All table button
to select all address pools.
2. Click the Delete table button.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Description
Enter the start IP address. This address specifies the first of the contiguous
addresses in the IP address pool. Any new DHCPv6 client joining the LAN is
assigned an IP address between this address and the end IP address.
Enter the end IP address. This address specifies the last of the contiguous
addresses in the IP address pool. Any new DHCPv6 client joining the LAN is
assigned an IP address between the start IP address and this IP address.
Enter the IPv6 prefix length, for example, 10 or 64.
LAN Configuration
Figure 36 on page 72), click the Edit button in
Figure 36 on page 72), select the check box to
75