NETGEAR ProSafe FVS318N Reference Manual page 182

2. In the Email IP/MAC Violations section of the screen, specify if you want to enable email
logs for IP/MAC binding violations. (You have to do this only once.) Select one of the
following radio buttons:
• Yes. IP/MAC binding violations are emailed. Click the Firewall Logs & E-mail page
link to ensure that emailing of logs is enabled on the Firewall Logs & E-mail screen
(see Configure Logging, Alerts, and Event Notifications
• No. IP/MAC binding violations are not emailed.
3. Click Apply to save your changes.
4. In the IP/MAC Bindings sections of the screen, enter the settings as explained in the
following table:
Table 38. IP/MAC Binding screen settings for IPv4
Setting
Name
MAC Address
IP Address
Log Dropped
Packets
5. Click the Add table button. The new IP/MAC rule is added to the IP/MAC Bindings table.

To edit an IP/MAC binding:
1. In the IP/MAC Bindings table, click the Edit table button to the right of the IP/MAC
binding that you want to edit. The Edit IP/MAC Binding screen displays.
2. Modify the settings that you wish to change (see the previous table; you can change the
MAC address, IPv4 address, and logging status).
3. Click Apply to save your changes. The modified IP/MAC binding displays in the IP/MAC
Bindings table.

To remove one or more IP/MAC bindings from the table:
1. Select the check box to the left of each IP/MAC binding that you want to delete, or click
the Select All table button to select all bindings.
2. Click the Delete table button.

To change the IPv4 MAC polling interval from its default setting of 10 seconds:
1. On the IP/MAC Bindings screen for IPv4, to the right of the IP/MAC Binding tab, click the
Set Poll Interval option arrow. The IP MAC Binding Poll Interval pop-up screen
displays:
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Description
A descriptive name of the binding for identification and management purposes.
The MAC address of the computer or device that is bound to the IP address.
The IPv4 address of the computer or device that is bound to the MAC address.
To log the dropped packets, select Enable from the drop-down list. The default setting
is Disable.
Firewall Protection
on page 338).
182