NETGEAR ProSafe FVS318N Reference Manual page 30

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Table 2. IPv4 Internet connection methods
Connection Method Manual Data Input Required
DHCP (Dynamic IP)
PPPoE
PPTP
Fixed (Static) IP
• If the autodetect process does not find a connection, you are prompted either to
check the physical connection between your wireless VPN firewall and the cable, DSL
line, or satellite or wireless Internet dish, or to check your wireless VPN firewall's MAC
address. For more information, see
Tasks on page 47 and
3. To verify the connection, click the Broadband Status option arrow in the upper right of the
screen to display the Connection Status pop-up screen. (The following figure shows a static
IP address configuration.)
Figure 11.
No manual data input is required.
The following fields are required:
• Login
• Password
• Account Name
• Domain Name
The following fields are required:
• Login
• Password
• Account Name
• Domain Name
• My IP Address
• Server IP Address
The following fields are required:
• IP Address
• IP Subnet Mask
• Gateway IP Address
• Primary DNS Server
• Secondary DNS Server
Configure Advanced WAN Options and Other
Troubleshoot the ISP Connection
Internet and Broadband Settings
30
on page 370.