Physical And Technical Specifications - NETGEAR ProSafe FVS318N Reference Manual

Table 91. Wireless VPN firewall factory default configuration settings (continued)
Feature
Administrative and monitoring settings
Secure HTTP management
Telnet management
Traffic meter
SNMP
Time zone
Time zone adjusted for daylight saving time
Routing logs
System Logs
Other event logs
Email logs
Syslogs
IPSec VPN logs
SSL VPN logs
1. The maximum wireless signal rate derived from IEEE Standard 802.11 specifications. The actual throughput varies. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.

Physical and Technical Specifications

The following table shows the physical and technical specifications for the wireless VPN
firewall:
Table 92. Wireless VPN firewall physical and technical specifications
Feature
Network protocol and standards compatibility
Data and Routing Protocols
Power plug (localized to the country of sale)
North America
United Kingdom, Australia
Europe
Input, for all regions
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Default Settings and Technical Specifications
Default Behavior
Enabled
Disabled
Disabled
Disabled
GMT
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Enabled
Enabled
Specification
TCP/IP, RIP-1, RIP-2, PPP over Ethernet (PPPoE),
DHCP, DHCPv6
120V, 60 Hz, input
240V, 50 Hz, input
230V, 50 Hz, input
12VDC @ 1A output
385