Rep 4.3 Pmo Cover Exit Rear - Xerox WorkCentre M20 Service Manual

2. Separate the MEA unit - rear cover from the ELA HOU - base frame assembly and ELA
HOU - scanner assembly, Figure 2.
Figure 2 MEA unit - rear cover removal
Replacement
Replacement is the reverse of the removal procedure.
WorkCentre M20, 4118, FaxCentre 2218 Family

REP 4.3 PMO Cover Exit Rear

Parts List on PL 4.25
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
NOTE: If necessary, refer to GP 20 for the acronym list and cross reference lists of more com-
monly recognised part names.
1. Remove the ELA HOU - scanner assembly, REP 14.1.
1 2. Remove the MEA unit - cover PA exit assembly, REP 10.3.
Remove the MEA
3. If necessary, remove the 2 thumbscrews that secure the PBA SUB NIC, (4118) PL 1.15
unit - rear cover.
Item 17 or (2218) PL 1.20 Item 17.
4. Remove the PMO - connect paper MFP, Figure 1.
1
Remove 1 screw, then the
PMO - connect paper MFP.
December 2006
4-21
WARNING
WARNING
CAUTION
Figure 1 PMO - connect paper MFP removal
Repairs and Adjustments
REP 4.2, REP 4.3