003: Multiband Limiter; 004: St.masteringlimtr; (Stereo Mastering Limiter) - Korg M50-88 Parameter Manual

Effect Guide

003: Multiband Limiter

This effect applies the Limiter to the low range, mid range,
and high range of the input signal. You can control
dynamics for each range to adjust the sound pressure of the
low range, mid range, and high range in a different way
from the EQ.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Band-Pass Filters
Low
Mid
+
High
Right
1.0 : 1...50.0 : 1,
a Ratio
Inf : 1
b Threshold
–40...0
[dB]
c Attack 1...100
d Release 1...100
e Low Offset
–40...0
[dB]
Mid Offset
f –40...0
[dB]
g High Offset
–40...0
[dB]
Gain Adjust –Inf,
[dB] –38...+24
h Src Off...Tempo
Amt –63...+63
Dry, 1 : 99...
Wet/Dry
99 : 1, Wet
i Src Off...Tempo
Amt –100...+100
e: Low Offset [dB]
f: Mid Offset [dB]
g: High Offset [dB]
These parameters set the gain of the trigger signal.
For example, if you do not want to apply compression to the
high range, reduce the High Offset value down below the
Threshold level. In this way, the high range limiter will not
respond, and compression will not be applied.
292
Limiter
Envelope - Control
Low Offset
Limiter
Gain Adjust
Envelope - Control
Mid Offset
Limiter
Envelope - Control
High Offset
Sets the signal compression
ratio p.291
Sets the level above which the
compressor is applied p.291
Sets the attack time p.291
Sets the release time p.291
Gain of the low-range trigger
signal p.292
Gain of the mid-range trigger
signal p.292
Gain of the high-range trigger
signal p.292
Sets the output gain p.291
Selects the modulation source
for the output gain
Sets the modulation amount of
the output gain
Sets the balance between the
effect and the dry input
Selects a modulation source for
Wet/Dry
Sets the modulation amount
for Wet/Dry

004: St.MasteringLimtr

(Stereo Mastering Limiter)

This is a stereo limiter that is optimized for mastering songs.
Stereo In - Stereo Out
Left
Wet / Dry
+
Right
Wet / Dry
Threshold
a
[dB]
b Out Ceiling
[dB]
Release
c
[msec]
Wet/Dry
d Src
Amt
Out Ceiling
Limiter
Envelope - Control
Limiter
Out Ceiling
Sets the level above which the
–30.0...0.0
compressor is applied
–30.0...0.0 Sets the output gain
0.50...1000.0 Sets the release time
Dry, 1 : 99... Sets the balance between the
99 : 1, Wet effect and the dry input
Selects a modulation source for
Off...Tempo
Wet/Dry
Sets the modulation amount
–100...+100
for Wet/Dry
Wet / Dry
Wet / Dry
p.291
p.291