Table of Contents
Advertisement
▼0–1–7: Menu Command
• 0: Memory Status ☞p.191
• 1: Exclusive Solo ☞p.73
• 2: Rename Song ☞p.191
• 3: Delete Song ☞p.191
• 4: Copy From Song ☞p.191
• 5: Load Template Song ☞p.191
• 6: Save Template Song (Save as User Template
Song) ☞p.192
• 7: FF/REW Speed ☞p.192
• 8: Set Location (Set Location for Locate Key) ☞p.192
• 9: GM Initialize ☞p.193
• 10: Copy From Combi (Copy from
Combination) ☞p.194
• 11: Copy from Program ☞p.195
• 12: Copy Tone Adjust ☞p.195
For more information, please see "Sequencer: Menu
Command" on page 191.
SEQ P0–1: Play/REC 0–1–8: Preferences
0–1–8: Preferences
0–1
–8a
0–1
–8b
Here, you can specify the realtime recording method, adjust
levels and make other settings for audio recording, and
adjust the metronome settings.
0–1–8a: Location, Meter, Tempo, Tempo
Mode, Song Select, Track Select,
Reso, RPPR
For more information, please see "0–1–1: Program T01–08,
0–1–2: Program T09–16" on page 129.
Selected Track Info:
This displays information about the currently selected MIDI
track. (See 0–1–1(2)a)
0–1–8b: Recording Setup
Selects the method of realtime recording.
Overwrite
When recording for the first time, you will normally select
this method.
If you use this method to record on a track on which data
has already been recorded, all previous data will be replaced
from the measure at which you began recording through all
subsequent measures.
With this method, the newly recorded data overwrites
musical data previously recorded on that track.
Normally you will use this method to record, and then
modify the results by using other types of realtime recording
or MIDI event editing.
1. Use Track Select to choose the track that you want to
record.
2. Set the Recording Setup to Overwrite.
3. In "Location," specify the location at which you wish to
begin recording.
4. Press the SEQUENCER REC/WRITE switch, and then
press the SEQUENCER START/STOP switch.
If the Metronome Setup is still set to the default settings, the
metronome will sound for a two-measure pre-count, and
then recording will begin.
Play the keyboard and move the controllers (such as the
joystick) to record your performance.
5. When you finish playing, press the SEQUENCER
START/STOP switch.
0–1
–8
Menu
137
Advertisement
Table of Contents
