Seq P1: Controllers; 1-1: Controllers Setup - Korg M50-88 Parameter Manual

SEQ P1: Controllers

1–1: Controllers Setup
1–1a
1–1b
1–1c
Here, you can assign the functions performed by SW1 and
SW2, and by knobs 1–4 when control surface Realtime
Control B mode is selected.
When you operate these knobs during recording, the MIDI
messages assigned to them will be recorded.
Note: SW1 and SW2 can be controlled by the SW1 and SW2
switches.
Note: The Panel Switch Assign setting of the program
assigned to each track will have no effect.
1–1a: Track Select, Tempo, RPPR, Track
Info, Selected Track Info
Track Select [Track01...16, Master Track]
(Tempo)
RPPR
Here, you can select the track, specify the tempo that will
control the arpeggiator etc., and turn RPPR on/off.
For more information, please see "0–1–1(2)a: Location,
Meter, Tempo, Tempo Mode, Song Select, Track Select, Reso,
RPPR" on page 129.
Selected Track Info
This area shows detailed information about its track
assignments.
For more information, please see "Selected Track Info" on
page 133.
1–1b: Panel Switch Assign
SW (SW1 Assign)
This assigns the function of SW1. For more information,
please see "List of SW 1/2 assignments" on page 382.
Note: If the on/off status of the SW1, SW2 switches is
memorized when you save it.
If you change the function setting, the status is reset to off.
Mode (SW1 Mode)
This specifies the on/off operation when you press the SW1
switch.
Toggle: The function will alternate between on and off each
time you press the SW1 switch.
Momentary: The function will be on only while you
continue holding down the SW1 switch.
1–1
Menu
[040.00...300.00, EXT]
[Off, On]
[Off, ..., JS-Y Lock]
[Toggle, Momentary]
SEQ P1: Controllers 1–1: Controllers Setup
SW2 (SW2 Assign)
Mode (SW2 Mode)
This assigns the function of SW2. The functions that can be
assigned to SW2 are the same as for SW1, with the
substitution of SW2 Mod. (CC#81) instead of the SW1's SW1
Mod. (CC#80).
1–1c: Realtime Control Knob Assign
Here, you can assign the functions (mainly types of control
change) that knobs 1–4 will have when RealTime Control B
mode (0–2–8b). (See "Realtime Control Knobs 1–4
Assignments" on page 383)
The functions you assign here are active when you use the
CONTROL ASSIGN REALTIME CONTROL switch to select
B mode, and operate knobs 1–4.
Knob 1–B
Knob 2–B
Knob 3–B
Knob 4–B
▼1–1: Menu Command
• 0: Memory Status ☞p.191
• 1: Exclusive Solo ☞p.73
• 2: Rename Song ☞p.191
• 3: Delete Song ☞p.191
• 4: Copy From Song ☞p.191
• 5: Load Template Song ☞p.191
• 6: Save Template Song (Save as User Template
Song) ☞p.192
• 7: FF/REW Speed ☞p.192
• 8: Set Location (Set Location for Locate Key) ☞p.192
• 9: GM Initialize ☞p.193
• 10: Copy From Combi (Copy from
Combination) ☞p.194
• 11: Copy from Program ☞p.195
For more information, please see "Sequencer: Menu
Command" on page 191.
[Off, ..., JS-Y Lock]
[Toggle, Momentary]
[Off, ..., MIDI CC#119]
[Off, ..., MIDI CC#119]
[Off, ..., MIDI CC#119]
[Off, ..., MIDI CC#119]
147