Korg M50-88 Parameter Manual page 2

Conventions in the operation manuals
References to the M50
The M50 is available as three models: the the 88-key
M50-88, the 73-key M50-73, and the 61-key M50-61.
References in these manuals to "the M50" refer to all of
these models collectively.
Abbreviations for the manuals: OM, PG
In the documentation, references to the manuals are
abbreviated as follows.
OM: Owner's Manual
PG: Parameter Guide
Procedure steps 1. 2. 3. ...
These indicate the steps of a procedure.
Symbols ,
These symbols respectively indicate a caution, a MIDI-
related explanation, a supplementary note, or a tip.
Example screen displays
The parameter values shown in the example screens of
this manual are only for explanatory purposes, and
may not necessary match the values that appear in the
Display of your instrument.
MIDI-related explanations
CC# is an abbreviation for Control Change Number.
In explanations of MIDI messages, numbers in square
brackets [ ] always indicate hexadecimal numbers.
ii
, Note , Tips
* This product uses the T-Kernel source code in compli-
ance with the T-License of the T-Engine forum (www.t-
engine.org).
* Apple, Mac are trademarks of Apple Inc., registered in
the US. and other countries.
* Windows XP is a registered trademark of Microsoft
Corporation in the U.S. and other counties.
* All other product and company names are trademarks
or registered trademarks of their respective holders.