Korg M50-88 Parameter Manual page 263

Copy Scale
This command copies data from a preset scale to a user scale
or copies a user scale to another user scale location. For
details on the preset scales, please see Type (Prog 1–2b).
1. Use the From field to select the copy-source scale.
If you select Pure Major or Pure Minor, specify the Key
(located at the right) as well.
Stretch cannot be selected if To is User All Notes Scale.
2. In To, selects the copy destination scale.
Write Drum Kits
This saves all drum kits 00 (INT)–47 (USER).
You must write an edited drum kit if you want to keep it.
Edited drum kits cannot be recovered if you turn off the
power before saving them.
Note: You can also use the SEQUENCER REC/WRITE
switch to write in the same way as the Write Drum Kits
command. Press the SEQUENCER REC/WRITE switch to
access the Update Drum Kits dialog box, and write the drum
kit. In this case, the data will be written to the currently
selected drum kit.
Rename Drum Kit
This renames a drum kit.
For more information, please see "Editing names" on
page 91 of the Owner's manual.
Copy Drum Kit
This command copies the settings of another drum kit to the
currently-edited drum kit.
Note: Drum kits 48 (GM)–56 (GM) cannot be edited, but you
may copy them to another drum kit and then edit them.
Select the copy source drum kit (From).
When you execute Copy Drum Kit, the settings of the
currently selected drum kit will be overwritten.
Global: Menu Command Copy Scale
Copy Key Setup
This command copies the settings of an individual key to
another key. You can also copy settings from two or more
contiguous keys at once.
1. In the From Key fields, select the range of keys that you
wish to copy.
2. In theTo Key field, select the copy destination key. If
you selected two or more keys in the From Key field,
their settings will be copied to the keys starting at the
To Key and continuing upward.
Swap Key Setup
This command exchanges (swaps) the settings of one key
with the settings of another key.
Use Source Key 1 and Source Key 2 to specify the keys
whose settings you want to swap.
Write Arpeggio Patterns
This command writes user arpeggio patterns U0000(INT)–
U1027(USER).
Note: You can also press the SEQUENCER REC/WRITE
switch to write arpeggio patterns in the same way as the
"Write Arpeggio Patterns" command. Press the
SEQUENCER REC/WRITE switch to access the dialog box,
and write the data.
Pattern, (Tempo), Octave, Resolution, Sort, Latch,
Key Sync, and Keyboard are parameters that are set in
Program, Combination, and Song. The Write operation
executed here does not save these parameters.
If you move here from Program or Combination mode
and set these parameters, you must return to the
original mode and write them.
Rename Arpeggio Pattern
This command renames the selected user arpeggio pattern.
Preset patterns P0–P4 cannot be renamed.
For more information, please see "Editing names" on
page 91 of the Owner's manual.
255