Korg M50-88 Parameter Manual page 47

Time
These settings let you use three different AMS sources to
control the Time parameters of the EG. For each of the three
AMS sources, the Attack, Decay, Slope, and Release times
each have their own modulation intensities.
Filter EG Time Modulation
AMS=Velocity, Intensity = a positive (+) value
Note-on Note-off Note-on
"Attack"=+, "Decay"=+, "Attack"=+, "Decay"=+,
"Slope"=+, "Release"=+ "Slope"=+, "Release"=+
Softly played note. Stongly played note.
Original Shape Times are longer.
Reaches Sustainmore
slowly.
AMS1
Selects the first AMS source to control the EG's Time
parameters. Velocity and Keyboard Track can both be useful
here, for instance.
For a list of AMS sources, please see "AMS (Alternate
Modulation Source) List" on page 374.
At (Attack)
This controls the depth and direction of the AMS
modulation for the Attack time.
For example, if you set the AMS source to Velocity and set
At (Attack) to +99, the Attack time will get much longer at
higher velocities. If you instead set At (Attack) to –99, the
Attack time will get much shorter at higher velocities.
When the AMS source is at its maximum value–for instance,
when Velocity is at 127–a setting of +8 will make the Attack
time almost twice as long, and a setting of –8 will cut the
Attack time almost in half. (See page 379)
Dc (Decay)
This controls the depth and direction of the AMS
modulation for the Decay time.
Sl (Slope)
This controls the depth and direction of the AMS
modulation for the Slope time.
Rl (Release)
This controls the depth and direction of the AMS
modulation for the Release time.
AMS2 and AMS3
These select the second and third AMS sources, respectively,
for controlling the EG's Time parameters. Each has its own
intensities for Attack, Decay, Slope, and Release. The
parameters of both AMS2 and AMS3 are identical to those of
AMS1, above.
Note-off Note-on Note-off
"Attack"=–, "Decay"=–,
"Slope"=–, "Release"=–
Stongly played note.
Times are shorter.
Reaches Sustainmore
quickly.
[List of AMS Sources]
[–99...+99]
[–99...+99]
[–99...+99]
[–99...+99]
PROG P3–1: Filter1 3–1–5: EG
▼3–1–5: Menu Command
• 0: Write Program ☞p.73
• 1: Exclusive Solo ☞p.73
• 2: Copy Oscillator ☞p.74
• 3: Swap Oscillator ☞p.74
• 4: Sync Both EGs ☞p.75
For more information, please see "Program: Menu
Command" on page 73.
39