Korg M50-88 Parameter Manual page 208

Sequencer mode
according to the number of inserted measures, but the time
signature and tempo will not move.
If you check All Tracks, the measures will be inserted into
all tracks including the Master Track. The playback data in
subsequent measures will play just as it did before this
command was executed.
Track 1
Before Insert
Track 2
Track 2 1 (4/4)
After Insert
Track 1
Track 1
Before Insert
Track 2
Track 2
After Insert
Track 1
Repeat Measure
This command repeatedly inserts the specified measures for
the specified number of times. When you execute the Repeat
Measure command, the measures will be inserted following
the measure specified by To End of Measure, and musical
data following the inserted data will be moved backward. It
is convenient to use this command when you have a song
that you play back with Track Play Loop (Seq P0–1–5(6))
turned on, and wish to expand it into musical data.
1. Use Track Select to choose the MIDI track (Track 01–16)
that you want to insert data into.
2. Select "Repeat Measure" to open the dialog box.
3. In From Measure and To End of Measure, specify the
range of measures that will be repeated.
(By default, From Measure and To End of Measure will be
set to the range you specified in the Track Edit page.)
4. In Times, specify the number of repetitions.
For example if you set From Measure to 001, To End of
Measure to 004, and Times to 2, the musical data of
measures 1–4 will be inserted into measures 5–8. The result
will be that measures 1–4 will be played twice.
5. Specify the track(s) on which you want to execute the
command.
If you execute with All Tracks unchecked, the performance
data will be inserted into the track you specified in Track
Select. Be aware that in this case, the performance data
following the insert position will move backward (i.e.,
200
Time signature = **/**
1 (4/4) 2 (4/4) 3 (3/4) 4 (5/4) 5 (2/4)
1 (4/4) 2 (4/4) 3 (3/4) 4 (5/4) 5 (2/4)
Insert two measures
2 (4/4) 3 (3/4) 4 (5/4) 5 (2/4)
1 (4/4) 2 (4/4) 3 (3/4) 4 (5/4) 5 (2/4)
Measures 4 and 5 will use the previously specified
time signature.
Time signature = 7/8
1 (4/4) 2 (4/4) 3 (3/4) 4 (5/4) 5 (2/4)
1 (4/4) 2 (4/4) 3 (3/4) 4 (5/4) 5 (2/4)
Insert two measures
1 (4/4) 2 (7/8) 3 (7/8) 4 (5/4) 5 (2/4)
1 (4/4) 2 (7/8) 3 (7/8) 4 (5/4) 5 (2/4)
Measures 2 and 3 will be 7/8, and measures 4 and 5
will be the previously specified time signature.
toward the end of the song) by the number of inserted
measures, but the time signature and tempo will not move.
If you execute with All Tracks checked, the performance
data will be inserted into all tracks, including the master
track. The performance data following the inserted
measures will play back in the same way as it did before.
If you execute the Repeat Measure operation on measures 1–4 with "Time" = 2,
measures 1–4 will be inserted into measures 5–8.
Before
Repeat
Track 1 1 2
3
Measure
After
Repeat
1 2 3
Track 1
Measure
Copy Measure
This command copies the measures of musical data
specified as the From source to the beginning of the measure
specified as the To location.
When you execute the Copy Measure command, the
existing track data at the copy destination will be rewritten.
1. Select the copy source song.
2. Select "Copy Measure" to open the dialog box.
3. In From: Track select the copy source track.
(By default, this will be the track you selected in Track
Select.)
If you execute with All Tracks unchecked, only the selected
track will be copied. Note that the time signature and tempo
will not be copied.
If you check All Tracks, the musical data of all tracks
including the master track will be copied.
4. In From Measure and To End of Measure, specify the
range of copy source measures.
(By default, From Measure and To End of Measure will be
the range that you specified in the Track Edit page.)
5. Use To: "Song" to specify the copy-destination song,
"Track" (if All Tracks is unchecked) to specify the copy-
destination track, and Measure to specify the starting
measure at which the copied data will be inserted.
Example: When you copy measures 5–7 of track 1 to the third measure of track 2,
measures 3–5 of track 2 will be rewritten.
Track 1
1 (4/4) 2 (4/4) 3 (4/4)
(source)
Track 2
1 (4/4) 2 (4/4) 3 (4/4)
(destination)
5 6
4
4 1 2 3 4 5 6
4 (3/4) 5 (3/4) 6 (3/4) 7 (4/4)
4 (3/4) 5 (3/4) 6 (3/4) 7 (4/4)