Korg M50-88 Parameter Manual page 227

0–2b: Memory Protect
Program
This setting protects the internal program memory.
On (checked): Internal program memory will be protected,
and the following write operations cannot be performed.
• Writing a program
• Loading preloaded program data
• Loading program data from media
• Receiving program data via MIDI data dump
Off (unchecked): Data can be written to internal program
memory.
Combination
This setting protects the internal combination memory.
On (checked): Internal combination memory will be
protected, and the following write operations cannot be
performed.
• Writing a combination
• Loading preloaded combination data
• Loading combination data from media
• Receiving combination data via MIDI data dump
Off (unchecked): Data can be written to internal
combination memory.
Song
This setting protects the internal song memory.
However, when the power is turned off, the song data in
song memory will be lost regardless of this setting.
On (checked): Internal song memory will be protected, and
the following write operations cannot be performed.
• Recording to the sequencer
• Loading preloaded song data
• Loading song data from media
• Receiving song data via MIDI data dump
Off (unchecked): Data can be written to internal song
memory.
Drum Kit
This setting protects the internal drum kit memory.
On (checked): Internal drum kit memory will be protected,
and the following write operations cannot be performed.
• Writing a drum kit
• Loading preloaded drum kit data
• Loading drum kit data from media
• Receiving drum kit data via MIDI data dump
Off (unchecked): Data can be written to internal drum kit
memory.
Arpeggio User Pattern
This setting protects the internal user arpeggio pattern
memory.
On (checked): Internal user arpeggio pattern memory will
be protected, and the following write operations cannot be
performed.
• Writing a user arpeggio pattern
• Loading preload arpeggio pattern data
• Loading user arpeggio pattern data from media
• Receiving user arpeggio pattern data via MIDI data
dump
Off (unchecked): Data can be written to internal user
arpeggio pattern memory.
Global P0: Basic Setup 0–2: System Preference
▼0–2: Menu Command
• 0: Write Global Setting ☞p.251
[Off, On]
• 1: Load Preload/Demo Data ☞p.251
• 2: Change all bank references ☞p.251
• 3: Touch Panel Calibration ☞p.252
• 4: Half Damper Calibration ☞p.252
• 5: Update System Software ☞p.252
For more information, please see "Global: Menu Command"
on page 251.
[Off, On]
[Off, On]
[Off, On]
[Off, On]
219