5-1-7: -4 T01-08, 5-1-8: -4 T09-16 - Korg M50-88 Parameter Manual

5–1–7: –4 T01–08,
5–1–8: –4 T09–16
5–1
–1a
5–1
–1b
5–1
–1c
Here, you can enable or disable transmission and reception
for the functions of knobs 1–4 when the control surface's
REALTIME CONTROL switch is set to Realtime Control B
mode. Use the P1: Controllers– Controllers Setup page to
assign the functions that knobs 1–4 will perform when
Realtime Control B mode is selected.
5–1–7(8)a: Combination Name, Tempo
5–1–7(8)b: Timbre Info
For more information, please see "2–1: EQ Trim T01–08, 2–2:
EQ Trim T09–16" on page 93.
5–1–7(8)c: MIDI Filter4
Timbre 01 (Timbre Number):
Enable Realtime Control Knob 1–B
Enable Realtime Control Knob 2–B
Enable Realtime Control Knob 3–B
Enable Realtime Control Knob 4–B
These settings enable or disable transmission and reception
of the MIDI messages assigned to knobs 1–4 when control
surface Realtime Control B mode is selected.
Timbre 02...08, 09...16 (Timbre Number):
These are the MIDI Filter4 settings for timbres 2–8 and 9–16.
They are the same as for timbre 1. For more information,
please see "Timbre 01 (Timbre Number):," above.
▼5–1–7(8): Menu Command
• 0: Write Combination ☞p.120
• 1: Exclusive Solo ☞p.73
• 2: Copy from Program ☞p.120
For more information, please see "Combination: Menu
Command" on page 120.
COMBI P5–1: MIDI Filter 1 5–1–7: –4 T01–08, 5–1–8: –4 T09–16
5–1
–1
Menu
[Off, On]
[Off, On]
[Off, On]
[Off, On]
105