Table of Contents
Advertisement
Media mode
19) Load a Song
Data for the selected song will be loaded into the song
number you specified as the load destination.
1. If you wish to load a song other than the selected song,
use Song (upper field) to re-select the song to be loaded.
2. In To Song (lower field), select the loading destination
song.
20) Load Tracks
The event data of all tracks in the selected song will be
loaded into the song you specify as the loading destination.
However, it is not possible to specify an uncreated song as
the loading destination.
In Song, specify the loading destination song.
21) Load Pattern Data
The selected user pattern will be loaded into a user pattern
of the selected loading destination song. However, it is not
possible to specify an uncreated song as the loading
destination.
1. If you wish to load a user pattern other than the one
already selected, use "Pattern" (upper field) to re-select
the user pattern that you wish to load.
2. In "To Song" and "Pattern" (lower field), select the
loading destination song and user pattern.
266
22) Load Standard MIDI File
The selected Standard MIDI File will be loaded into the song
number you select as the loading destination.
1. In Song, select the loading destination song.
2. If you turn "Exclusive" Off (unchecked), any System
Exclusive messages or Universal Exclusive messages
included in the SMF data will not be loaded.
If this is On (checked), System Exclusive messages and
Universal Exclusive messages included in the SMF data will
be loaded as System Exclusive events.
The GS/XG sound maps and messages are not
supported. Depending on the content of the data, it
may not play back correctly, but the data itself will be
maintained if Exclusive is checked.
If you select an undefined file and choose Load
selected, the file will be assumed to be a Standard MIDI
File, and the Load Standard MIDI File dialog box will
appear. When you execute loading, the file will be
loaded into the song that was specified as the loading
destination. However if the file format is inappropriate,
the operation will be invalid and an error message will
be displayed.
The program bank and program numbers loaded into
the song will follow the Bank Map (Global 0–2a)
setting. If Bank Map is KORG, bank A will be selected
for bank select 00.00 (MSB. LSB). If Bank Map is GM(2),
bank G will be selected.
23) Load and Transmit MIDI Exclusive Data
All data in the .EXL file will be loaded, and transmitted from
MIDI OUT or the USB connector.
If the .EXL file contains two or more Exclusive data items,
use Transmit Interval Time to specify the time interval that
will be inserted between each item of Exclusive data.
If you are transmitting the data to another M50, the required
time interval will depend on the type of data. After
transmitting all program data, you must allow an interval of
approximately 1 second. For details please see the Global
mode section on Dump Program–Dump Drum Track
Pattern (see page 253). For other MIDI devices, please see
their owner's manual.
Advertisement
Table of Contents
