Table of Contents
Advertisement
Note: The selected drum kit can be played from the
keyboard even before you load it. This is convenient when
you want to audition drum kits before loading. For more
information, please see "PCG Preview" on page 259.
2. In To Drum Kit (lower field), select the loading destina-
tion drum kit.
11) Load Arpeggio Patterns
All user arpeggio pattern data in the .PCG file will be
loaded.
12) Load Arpeggio Pattern
[U0000-0899(INT), U0900-1027(USER)]:
All user arpeggio pattern data in the selected user arpeggio
pattern bank will be loaded into the user arpeggio pattern
bank you specify as the loading destination.
In "To," select the loading destination user arpeggio pattern
bank.
If you execute this command with U0900–1027(USER)
specified as the loading destination for the selected user
arpeggio pattern bank 0000–0899(INT), user arpeggio
patterns 0000–0127 will be loaded. If you select 0000–
0899(INT) as the loading destination for U0900–1027(USER),
the data will be loaded into user arpeggio patterns 0000–
0127.
13) Load an Arpeggio Pattern
The selected user arpeggio pattern data will be loaded into
the user arpeggio pattern number that you specify as the
loading destination.
1. If you wish to load a user arpeggio pattern other than
the currently selected one, use "Arp Pattern" (upper
field) to re-select the user arpeggio pattern that you
wish to load.
The selected user arpeggio pattern can be played from the
keyboard even before you load it. This is convenient when
you want to audition the user arpeggio pattern you wish to
load.
2. In "To Arp Pattern" (lower field) specify the loading
destination user arpeggio pattern.
14) Load Drum Track Patterns
This command loads all drum track user patterns from the
.PCG file.
Media: Menu Command Load selected
15) Load a Drum Track Pattern
This command loads the selected single drum track user
pattern data into the drum track user pattern location that
you specify as the load-destination.
1. If you want to load a pattern other than the selected
pattern, use "Pattern" (the upper field) to re-select the
pattern that you want to load.
2. Use the "To Pattern" field (the lower field) to specify
the load-destination pattern.
16) Load Global Setting
Global setting data in the .PCG file will be loaded.
This includes Global mode parameters other than drum kits
and arpeggeio patterns.
Memory protect and Effect Global SW settings will not
be loaded.
17) Load .SNG
All data in the .SNG file will be loaded.
1. Use Select .SNG Allocation to specify how the song
data from the .SNG file will be loaded.
Append: The song will be loaded after the last song data
that already exists in internal memory. At this time, the song
data in the .SNG file being loaded will be packed forward.
(See diagram in ".SNG Allocation" on page 263)
Select this when you want to add song data from media
without erasing the song data that currently exists in
internal memory. Cue list data will not be loaded.
Clear: All cue list data and song data currently existing in
internal memory will be erased, and the cue list and song
data will be loaded in the state in which it was saved (See
diagram in ".SNG Allocation" on page 263).
Select this when you want to reproduce the saved state
immediately after power-on, etc.
2. If a .PCG file of the same filename exists in the current
directory, you can select the "Load ********.PCG too"
check box.
See step 1 of the "1) Load .PCG" on page 263.
18) Load Cue Lists
The cue list data in the .SNG file will be loaded.
265
Advertisement
Table of Contents
