031: Polysix Ensemble; 032: Stereo Flanger - Korg M50-88 Parameter Manual

Effect Guide

031: Polysix Ensemble

This models the ensemble effect built into the classic Korg
PolySix programmable polyphonic synthesizer.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
+
Right
Depth 0...100
Src Off...Tempo
a
Amt –100...+100
Dry, 1 : 99...
Wet/Dry
99 : 1, Wet
b Src Off...Tempo
Amt –100...+100

032: Stereo Flanger

This effect gives a significant swell and movement of pitch
to the sound. It is more effective when applied to a sound
with a lot of harmonics. This is a stereo flanger. You can add
spread to the sound by offsetting the phase of the left and
right LFOs from each other.
Stereo In - Stereo Out
Left
Right
LFO Shape
LFO: Tri / Sine
Delay Time
a 0.0...50.0
[msec]
LFO Triangle,
Waveform Sine
b
LFO Shape –100...+100
LFO Phase
c –180...+180
[degree]
LFO
Frequency 0.02...20.00
[Hz]
d
Src Off...Tempo
–20.00...
Amt
+20.00
MIDI Sync Off, On
MIDI,
BPM 40.00...
e
300.00
Base Note ...
Times x1...x32
310
Wet / Dry
Polysix
Ensemble
Wet / Dry
Sets the depth of the effect
Selects the modulation source
that will control the effect
depth
Sets the amount by which the
effect depth will be modulated
Sets the balance between the
effect and the dry input
Selects a modulation source for
Wet/Dry
Sets the modulation amount
for Wet/Dry
Wet / Dry
Flanger
Feedback
High Damp
Flanger
Wet / Dry
LFO Phase
Sets the delay time from the
original sound
Selects the LFO Waveform
Changes the curvature of the
LFO Waveform p.298
Sets the LFO phase difference
between the left and right
p.298
Sets the speed of the LFO p.298
Selects a modulation source for
LFO speed
Sets the modulation amount of
LFO speed
When this is on, the LFO speed
is set by BPM, Base Note, and
Times, instead of Frequency
p.297
MIDI syncs to the system
tempo; 40–300 sets the tempo
manually for this individual
effect p.297
Selects the type of notes that
specify the LFO speed p.297
Sets the number of notes that
specify the LFO speed p.297
Individual, Selects either (individual) LFO,
LFO Type Common1, Common FX LFO1, or Common
Common2 LFO2
f
Sets the phase offset when
CmnLFO
–180...+180 Type = Common 1 or Common
Offset [deg]
2
Sets the depth of LFO
g Depth 0...100
modulation
Sets the feedback amount
Feedback –100...+100
h
Sets the feedback damping
High Damp
0...100 amount in the high range
[%]
–Wet... Sets the balance between the
Wet/Dry –1 : 99, Dry, effect and the dry input
1 : 99...Wet
i Selects a modulation source for
Src Off...Tempo
Wet/Dry
Sets the modulation amount
Amt –100...+100
for Wet/Dry
h: Feedback
i: Wet/Dry
The peak shape of the positive and negative Feedback value
is different. The harmonics will be emphasized when the
effect sound is mixed with the dry sound if you set a
positive value for both Feedback and Wet/Dry, and if you
set a negative value for both Feedback and Wet/Dry.
h: High Damp [%]
This parameter sets the amount of damping of the feedback
in the high range. Increasing the value will cut high-range
harmonics.
p.297
p.297
p.310
p.310
p.299, p.310