Korg M50-88 Parameter Manual page 131

M50 series music workstation
Table of Contents

Advertisement

Copy Insert Effect
This command copies effects settings from Program,
Combination, or Song. For more information, please see
"Copy Insert Effect" on page 76.
Note: The slot's MIDI control channel, as specified by the Ch
parameter on the P8–1: IFX– IFX1–5 pages, will not be
copied.
Swap Insert Effect
This command swaps (exchanges) insert effect settings. For
more information, please see "Swap Insert Effect" on
page 76.
Note: The slot's MIDI control channel, as specified by the Ch
parameter on the P8–1: IFX– IFX1–5 pages, will not be
swapped.
DrumKit IFX Patch
This patches the Bus (IFX/Output) Select settings for each
key of a drum kit, temporarily changing the insert effect
connection destinations.
You can execute this command if the program assigned to
the timbre is a drum program and Bus (IFX/Output) Select
is set to DKit. The Bus (IFX/Output) Select setting (Global
5–4b) of each key in the drum kit must be set to one of IFX1–
5.
1. In the Routing1 page or Routing2 page, select the tim-
bre for which you want to make settings. (Select a tim-
bre parameter or Timbre Number.)
2. Select "DrumKit IFX Patch" to open the dialog box.
3. In the DrumKit "IFX" popup, select the output bus to
which you want to patch the signal: an insert effect or
L/R or Off.
Note: To restore the condition of the drum kit, execute
IFX1→IFX1, IFX2→IFX2, IFX3→IFX3, IFX4→IFX4,
IFX5→IFX5 (see page 113).
Copy MFX/TFX
This command copies effect settings from Program,
Combination, or Song. For more information, please see
"Copy MFX/TFX" on page 76.
Note: The slot's MIDI control channel, as specified by the Ch
parameter on the P9: MFX/TFX– MFX1 and TFX page, will
not be copied.
Swap MFX/TFX
This command swaps (exchanges) insert effect settings. For
more information, please see "Swap MFX/TFX" on page 77.
Note: The slot's MIDI control channel, as specified by the Ch
parameter on the P9: MFX/TFX– MFX1 and TFX page, will
not be copied.
Combination: Menu Command Copy Insert Effect
Write FX Preset
This command saves the edited effect into the M50's internal
memory.
For more information, please see "Write FX Preset" on
page 77.
123

Advertisement

Table of Contents
loading

This manual is also suitable for:

M50-73M50-61

Table of Contents