Arp - Korg M50-88 Parameter Manual

Program mode
0–8d: External
MIDI Channel
This read-only parameter shows the MIDI Channel
assignment for the knob. Each can send on a different
channel, if desired.
G means that the knob will transmit on the Global MIDI
Channel, as set in Global mode.
CC# Assign
This read-only parameter shows the MIDI CC sent by the
knob.
Value
This is the current value of the knob's MIDI CC.
14

ARP

[01...16, G]
0–8a
0–8b
0–8e
[Off, 000...119]
[000...127]
Arpeggio control lets you use the four knobs to control the
arpeggiator performance in realtime.
0–8b: Control Assign
Control Assign [Realtime Control, External, ARP]
This selects the items that will be affected by the control
surface.
0–8e: Arpeggiator
The functions of knobs 1–4 are fixed. The knobs will control
the duration of the arpeggiated notes, their velocity, the
pitch range, and the length of the arpeggio pattern.
Knob 1: Gate
Adjusts the duration (gate time) of the arpeggiated notes
(See "Gate" on page 60).
Knob 2: Velocity
Adjusts the velocity of the arpeggiated notes (See "Velocity"
on page 60).
Knob 3: Length
Adjusts the length of the arpeggio pattern.
Knob 4: Octave
Adjusts the pitch range over which the arpeggiator will play,
in one-octave steps (See "Octave*" on page 59).
▼0–8: Menu Command
• 0: Write Program ☞p.73
• 1: Exclusive Solo ☞p.73
For more information, please see "Program: Menu
Command" on page 73.
If Arpeggio Tone Mode is set to Fixed Note, operating
knob 4 will not affect the pitch range.
0–8
Menu
[–64...+00...+64]
[–64...+00...+64]
[–64...+00...+64]
[–64...+00...+64]