Dial-Out Dhcp; Dial-Out Ip; Dial-Out Netmask; Dial-Out Gateway - Speco DVR-4TN User Manual

Dial-out DHCP

This item allows the user to obtain a dynamic IP address from a DHCP
(Dynamic Host Configuration Protocol) server over a modem connection. If
the item is enabled (ON), a dynamic IP will be assigned to the DVR-4TN/ 8TN/
16TN/ 16TS/ 16TT series unit. In this case, the user does not need to
configure a static IP and the following settings will be "read only."
Select <ON> to enable the DHCP function, or <OFF> to set the dial-out IP
address, Netmask, Gateway and DNS manually. The default setting is <ON>.

Dial-out IP

This item is for setting a static IP address that identifies the DVR-4TN/ 8TN/
16TN/ 16TS/ 16TT series unit over a modem connection. Set the <Dial-out
DHCP> to <OFF> for accessing this item.
Move the cursor over <Dial-out IP> and press ENTER, then press UP /
DOWN keys to change the values in the selected field.

Dial-out Netmask

This item is for setting the Netmask that identifies the DVR-4TN/ 8TN/ 16TN/
16TS/ 16TT T series unit over a modem connection. To configure the item,
DHCP must be set to <OFF>.
Move the cursor over <Dial-out Netmask> and press ENTER, and then press
UP / DOWN keys to change the values in the selected field.

Dial-out Gateway

Users are allowed to specify the IP address of the gateway or router
associated with this unit. To configure this item, DHCP must be set to <OFF>.
Move the cursor over <Dial-out Gateway> and press ENTER, and then press
UP / DOWN keys to change the values in the selected field.

Dial-out DNS

This item allows the user to specify the IP address of the Domain Name
System (DNS) associated with the unit. To configure this item, DHCP must be
set to <OFF>.
Move the cursor over <Dial-out DNS> and press ENTER, and then press UP /
DOWN keys to change the values in the selected field.
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
User's Manual
71