Main / Call Monitor Dwell; Sequence Setup; Main / Call Monitor Schedule - Speco DVR-4TN User Manual

5.5

Sequence Setup

The Sequence Setup menu allows the user to set the camera sequence
schedule and dwell time for main and call monitor. Select <Sequence Setup>
in Main menu and press ENTER; the menu displays as follows.
1. Main Monitor Dwell
2. Main Monitor Schedule
3. Call Monitor Dwell
4. Call Monitor Schedule
Items in the Sequence Setup menu are described in the following
subsections.
5.5.1

Main / Call Monitor Dwell

The Main / Call Monitor can be set to display full screen video for all installed
cameras in sequence. This item is used to set the Main / Call Monitor dwell
time, which is the amount of time elapsed between switching images. The
dwell time has an available range of 1 to 120 seconds. The default value is 5
seconds.
5.5.2

Main / Call Monitor Schedule

This item is used to set the Main / Call Monitor camera sequence in full screen
format. Move the cursor to <Main Monitor Schedule> and press ENTER; the
menu is displayed as follows.
Follow these steps to set a sequence:
• Press LEFT direction key to delete the original setting.
• Press the desired Channel keys to assign a camera to that location in the
sequence.
• Continue the steps until the sequence is completed.
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
Sequence Setup
Main Monitor Schedule
_►_►_►_►_►_►_►_►_
►_►_►_►_►_►_►_
Press 1-16 Key To Select Channel
Press ◄ To Delete
User's Manual
5 Sec
5 Sec
93