Show Color Bar; Vga Resolution; Camera Setup - Speco DVR-4TN User Manual

User's Manual
5.2.7

Show Color Bar

Choose this item to display a color bar pattern on the screen. The color bar
helps to adjust the monitor hue, saturation, text color, and display options.
Press ESC to exit the color bar pattern and return to the OSD menu.
5.2.8

VGA Resolution

This item allows the user to select appropriate VGA resolution for the VGA
monitor connected to the unit. The options are <800×600> (default),
<1024×768> and <1280× 1024>.
5.3

Camera Setup

The items in the Camera Setup menu enable the user to set camera
parameters, including camera title, dome protocol and ID for each connected
camera. The menu is shown below..
1. Camera Select
2. Dome Protocol
3. Dome ID
4. Camera Title
5. Covert
6. Termination
7. Brightness
8. Contrast
9. Saturation
10. Hue
11. Audio Association
Items in this menu are described in the following subsections.
82
NOTE: If the selected VGA resolution is too high for the monitor, the
message "No Signal'' will be shown on screen. Then please press ESC
on the front panel to restore the original setting.
Camera Setup
CH1
None
0
CH1
No
Yes
0
0
0
0
Both
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08