Warning Handling Settings; Alarm Event Notification; Alarm-Out; E-Mail - Speco NRP Series User Manual

Alarm Management

9.4.2 Warning Handling Settings

① Click StartSettingsAlarmExceptionWarning Handling Settings to go to the interface as shown below.
② Enable or disable "Push", "Alarm-out", "Buzzer", "Pop-up Message Box" and "E-mail". The exception handling settings are similar to that of the
sensor alarm (see 9.1 Sensor Alarm for details).
③ Click "Apply" to save the settings.

9.5 Alarm Event Notification

9.5.1 Alarm-out

① Click StartSettingsAlarmEvent Notification to go to the following interface.
② Set the delay time and the schedule of each alarm-out. You can click "Edit Schedules" to edit the schedules (see 7.3.1 Add Schedule for
details).
③ Click "Apply" to save the settings. You can click "Test" to test the alarm output.

9.5.2 E-mail

Click StartSettingsAlarmEvent NotificationE-mail to go to the e-mail configuration interface. Set the e-mail address of the recipients. See
11.1.5 E-mail Configuration for details.
48
NVR User Manual