Setting Preset Points - Speco DVR-4TN User Manual

Auto / Enter
• In OSD Menu mode, this key is used to make selection.
• In dome control mode, this key is used to activate automatic focus and iris
function.
Iris Close
Use this function to close the Iris on the dome camera.
Focus Far
Use this function to focus the selected dome camera far.
Zoom Out
Use this function to zoom the dome camera out. This enables the user to
move away from the viewing area
Pan / Tilt
Use this function to pan and tilt dome camera.
4.6.5

Setting Preset Points

The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit allows user to set preset
positions; the amount of preset points allowed depends on the dome
manufacturer.
Follow these steps to set preset points..
• Press a Channel key to view the corresponding camera in full screen.
• Then press DOME to enter dome control mode.
• Use Direction keys to position the dome camera to desired position.
• Press 2 to view the dome control Hint Screen; press 2 again to toggle the
Hint Screen.
Dome Control
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
Hint Screen
DOME / ESC: Exit
MODE / PLAY: Iris Open / Close
SEQ / FREEZE: Focus Near / Far
MENU / SEARCH: Zoom In / Out
ENTER: Auto Focus / Iris
◄▲▼►: Pan / Tilt
CH1: Set / Go Preset
CH2: Hint Screen On / Off
User's Manual
49