Preset Record Configuration; Per Camera Configuration; Camera Select - Speco DVR-4TN User Manual

User's Manual
5.4.3

Preset Record Configuration

The <Preset Config> is used to select the preset recording quality and frame
rate. Different default recording quality levels are offered for the user to
choose: <Best Quality>, <Standard>, <Extended Record>, <Event Only>,
<ezRecord> and <OFF>.
According to various Record modes, the preset configuration options for
normal and event status are described in terms of relative recording rate
(Picture per Second; PPS) and recording size for each channel in the table
below.
These preset conditions override any other quality and rate settings. The
default Preset Configuration setting is <Standard>.
You can refer to
5.4.4

Per Camera Configuration

This submenu is used to set the Day / Night / Weekend PPS (Picture per
Second) and recording quality for each channel. The <Preset Configuration>
must be set to <OFF> for accessing these schedules.
The menu is displayed below is in Record mode: 720×240@30PPS in NTSC /
720×288@25PPS in PAL).
Cameral Select
Normal PPS
Normal Qlty
Event Max PPS
Event Qlty
Event Act
5.4.4.1

Camera Select

This item is used to select a desired channel for setting the associated
parameters. Move the cursor to <Camera Select> and press ENTER, then
select a channel using UP / DOWN keys. Press ENTER again to confirm the
setting.
88
Appendix B: Record Configuration
Per Camera Config
Day
7.5
MId
30
Best
Both
for detailed information.
CH1
Night Weekend
7.5 7.5
Mid Mid
30 30
Best Best
Both Both
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08