5.
Advanced System Configuration
The detailed functions and settings of the DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT
series can be set by using the hierarchical OSD menu. This chapter describes
the menu items and options in the OSD menu.
To enter the Main menu, press MENU and then enter Administrator or User
password. The default passwords are shown in the following table. The same
default passwords are used for entering the remote viewing software
SpecoRemote™.
Administrator Password
It is strongly recommended to change the passwords to prevent unauthorized
access to the unit.
After entering the correct password, the Main menu is displayed.
1. System Setup
2. Monitor Setup
3. Camera Setup
4. Record Setup
5. Sequence Setup
6. Event Setup
7. Database Setup
8. Configuration
9. Video Export
10. Text Setup
11. Shutdown
Key Usage in OSD Menu
<Direction Keys>
In the OSD menu, Direction keys are used to move the cursor to previous or
next fields. UP / DOWN are used to change the value in the selected field.
<ENTER>
In OSD menu or selection interface, press the key to make selection or save
settings.
<ESC>
Press to cancel or exit from certain OSD menu without saving any changes.
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
1234
Main Menu
User Password
4321
User's Manual
51