4 channel hdcctv digital video recorder (93 pages)
Summary of Contents for Speco DVR-4TL/160
Page 1
® DVR-4TL series User’s Manual 00P3DG090SSEA1 Version 1.1 00P3DG090SSEA1...
Page 2
User’s Manual Caution and Preventive Tips • Take care not to drop the unit or subject the unit to major shocks or jolts. • Do not place this unit on an unstable stand, bracket or mount. • This unit is designed for indoor use only. Do not place the unit near water or in other extremely humid conditions.
Page 3
Important Information Before proceeding, please read and observe all instructions and warnings in this manual. Retain this manual with the original bill of sale for future reference and, if necessary, warranty service. When unpacking your unit, check for missing or damaged items. If any item is missing, or if damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT.
User’s Manual 1. Overview...6 Product Key Features...6 Product Application Diagram ...7 2. System Setup...7 Position the Unit ...8 Selecting Video Format ...8 Connecting Devices to the Unit ...8 Rear Panel Connections...9 3. General System Setup ...12 Front Panel Introduction ...12 3.1.1 LED Definition ...12 3.1.2...
Page 5
4.4.2 To Export Normal Video ...27 4.4.3 To Export Event Video ...28 Deleting Recorded Video...28 Dome Control...29 4.6.1 Dome Connection ...29 4.6.2 Dome Protocol Setup...30 4.6.3 RS485 Setup...30 4.6.4 Dome Controlling Keys ...31 4.6.5 Setting Preset Points ...33 4.6.6 Calling Preset Points...34 Appendix A: Technical Specifications ...35 User’s Manual...
User’s Manual Overview The DVR-4TL series is an integrated digital video recorder that combines the features of a time-lapse audio / video recorder, a multiplexer, and a video server to create a single security CCTV solution. Its outstanding triplex operation enables users to view live or playback...
• Multiple language on-screen menus • Network software supports static IP and DHCP • Support RS-485 remote control keyboard (Optional) Product Application Diagram Connect the unit with other devices as shown in the system diagram to complete a video surveillance solution. The figure shows also the expandability and flexibility of this digital recording system.
User’s Manual Position the Unit Position / mount the DVR-4TL series in a proper place and be sure to power off the unit before making any connections. The placed location should avoid hindering or blocking the unit from airflow. Enough airflow is needed to protect the unit from overheating.
User’s Manual Connecting Short-term Device If you plan to install any short-term devices to the DVR-4TL series and use them as part of the unit system, such as USB CD-ROM, USB Hard Disk Drive, etc, make sure those devices are connected only after the unit is powered up.
Page 10
The call monitor is used to display full screen video of all installed cameras in sequence. The BNC call monitor connector allows user to connect the DVR-4TL series unit with an optional call monitor. Main Monitor (BNC/ VGA) BNC and VGA output connectors are offered for connecting to a main monitor.
Page 11
Power Jack The DVR-4TL series has a free voltage DC power connection jack. Please connect the power adapter that ships with the unit. NOTE: Use of other power adapter may cause overloading. UTP Input Short for Unshielded Twisted Pair, which is a popular type of cable. Due to its low cost, UTP cabling here is used for replacing BNC cabling.
The front panel controls enable user to control the unit and preset the programmable functions. 3.1.1 LED Definition The DVR-4TL series LEDs on the front panel are described as follows. Power LED (Green) The LED lit during the period when the correct power is connected. 2005/11/09 PM04:31:22...
Network LED (Green) The LED should be lit when DVR-4TL series is connected to a network and blink when the data is being transferred. Alarm LED (Red) The LED should be lit during an alarm is triggered. REC LED (Green) The LED should blink while the DVR-4TL series is recording.
Page 14
User’s Manual SEQ (Sequence) Press to start automatic sequencing of the video coming from the installed cameras. MENU Press the key to call the OSD setup menu. Press to cancel or exit from certain mode or OSD menu without changing the settings made previously.
DVR unit. To Power Up the Unit Check the used type of power source before plug in your DVR first (the unit accepts the power input between AC100V to AC240V) The color bar and system checking information will be shown on the monitor and disappear when the unit has been completely powered up.
Entering OSD Setup Menu The OSD Main menu contains a list of items that are used to configure the DVR-4TL series. To enter the Main menu, press MENU and then enter Administrator or User password. The Password Verification screen displays as follows.
System Date / Time Setting User can set the current date, time and other OSD parameters in Date/Time menu. The administrator’s privileges are required for entering the submenu. In OSD Main menu, select <System Setup> and press ENTER, then select <Date/Time>...
User’s Manual Date Display Mode This function allows user to set the OSD display type of the date / time. There are three options to select from: <Y/M/D>, <M/D/Y> or <D/M/Y>. represents “Year”, “M” represents “Month” and “D” represents “Day”. Move to the item and press ENTER, the option starts blinking.
Record Schedule / Quality Setting The Record Setup menu allows user to set recording quality, recording schedules, and other recording parameters. To setup the recording quality and schedules, you have to enter the OSD Setup Menu with correct Administrator's password. In the Main menu, move the cursor to <Record Setup>...
User’s Manual 3.5.2 Schedule Setup The Schedule Setup is used to set the day and night time, or weekend recording schedule. Select <Schedule Setup> from the Record Setup menu and press ENTER; the following menu is displayed. 1. Day Time Start 2.
3.5.4 To Record Event Video Only If you want your DVR to record images with triggered alarm (both Alarm in and Motion) only, and stop recording under normal circumstances, then follow the steps to setup your unit: • Enter the OSD setup menu with correct password.
User’s Manual Viewing in Multi-window Various multi-window view formats are offered for selecting. To switch between available viewing formats, press MODE repeatedly. 4.1.2 Digital Zoom Users are able to view a 2× full screen in live mode. To view the 2× full screen, follow the steps.
The general operations in playback mode are described as follows. Key Usage in Playback The key usage is slightly changed in playback mode. Following is the key usage found in playback mode. LEFT (Reverse Playback) The key is used to reverse the recorded video while the unit is playing back. Press the key repeatedly to increase the speed of reverse playback by 1×, 2×, 4×, 8×, 16×, or 32×.
ESC to stop sequencing. Searching Recorded Video The DVR-4TL series is capable of searching and playing back recorded video by date and time or events. Entering the specific date and time of the wanted video, the unit will then search for the matched video and play it on the monitor.
• Either press PLAY/STOP again to return to live video. NOTE: If there is no available recorded video that matches your specified time and date, the unit starts playback from the next available video. NOTE: The date/time information will be shown on the screen with a DST icon if the Daylight Saving Time function is enabled.
USB ThumbDrive If you want to export video to an external device, make sure the external storage has been connected to the DVR unit and the port has been set appropriately for video export. According to the size of video, the export may take you about 10 minutes to 1 hour.
“ezBurn” window displays as below figure. The information shown on the window is for read only. • If there is no any exportable external device connected to the DVR unit, then a warning message will be shown on the screen, as below figure: Please install the target device/media •...
The information shown on it is for read only. Data 205/11/07 • If there is no any exportable external device connected to the DVR unit, a warning message will be shown on the screen • Press ENTER to start the export the whole event video to the connected device;...
The default of this item is <2000/01/01>. Dome Control DVR-4TL series allows user to control a dome camera by the front panel. In Live mode, user can press CHANNEL key to display the desired dome camera in full view. To enter Dome Control mode, press the DOME key and press channel key 2 to display the hint screen;...
Dome Protocol Setup The Dome Protocol item lists the available dome protocols for communicating with dome cameras connected to the DVR-4TL series. From the Main menu, select <Camera Setup> and press ENTER. The following menu is displayed. 1. Camera Select 2.
1 to 255. The default ID is 224. Note that no two devices on the same bus should be given the same ID address, or a conflict may occur. The default DVR-4TL series RS-485 settings are 9600 Baud, 8 Data Bits, 1 Stop Bit and No Parity.
Page 32
User’s Manual Zoom In Use to zoom the dome camera in. This function is for user to choose the viewing area, more or less of it. Use to leave dome control mode and return to live and full screen viewing mode.
4.6.5 Setting Preset Points The DVR-4TL series allows user to set preset positions; the amount of preset points depends on the dome manufacturer. Follow the steps to set preset points. • Press a Channel key to view the corresponding camera in full screen.
User’s Manual 4.6.6 Calling Preset Points Follow the steps to call preset points. • Press a Channel key to view the corresponding camera in full screen. • Then press DOME to enter dome control mode. • Press 2 to view the dome control Hint Screen; press 2 again to toggle the Hint Screen.
Appendix A: Technical Specifications All specifications are subject to change without notice. Specifications Video Input Video Standard Triplex (Live, Record, Playback, Remote, and Internet access) Video Operation Main Monitor Outputs Picture Refresh Rate Digital Zoom Camera Installation Audio Input Output Recording Compression Method Recording Mode...
Page 36
User’s Manual Alarm Alarm Input Alarm Relay Output Alarm Detection Motion Detection Video Loss Detection Auditory Alert Communication Communication Protocol Remote Control Software Network Connectivity LAN Remote Control Dome Control Dome Control Protocol Monitoring, Playback, Instant Recording, Dome Camera Control Remote Operation On-Screen Display Search...