5.5 Image/Alarm-out
Select a channel and click on Image as shown in Figure 5-13.
Select a channel and click on Image as shown in
5.5.1 Image
For supported camera, brightness, contrast, hue and satu
Click on the Reset button to restore system default setup.
Reset button to restore system default setup.
5.6 WAN mode
In WAN mode, after you logged in, the interface is shown as below. See Figure 5-14
In WAN mode, after you logged in, the interface is shown as below. See
brightness, contrast, hue and saturation can be adjusted.
Figure 5-13
Figure 5-14
14.
101