Email Address; Smtp Setup; Email Via Smtp - Speco DVR-4TN User Manual

User's Manual
When the trigger port that you have just modified can be allocated, the 1
"Port allocated" will be followed by a "
port is allocated. "X" indicates that the port cannot be allocated. Note that the
DDNS port will be automatically changed to the same port as the trigger port.
For instance, when you have set the trigger to 123, the DDNS port will be
automatically changed to port 123. Therefore, when the ports are allocated,
"Port allocated" and "DDNS submitted" will both be followed by the "
The 2
5.1.6.6

Email Address

This item is used to edit the e-mail address where alarm event information will
be sent. Follow these steps to setup the e-mail address.
• Select <Email Address> from Network Setup menu and press ENTER. A
virtual keyboard displays.
• Use Direction keys to move the cursor for selecting character.
• Press ENTER to add the selected character to the password entry field.
• When done, move the cursor to <OK> and press ENTER to save the
settings and exit.
5.1.6.7

SMTP Setup

Simple Mail Transfer Protocol (SMTP) is a protocol for sending e-mail
messages between servers. SMTP is a relatively simple, text-based protocol,
where one or more recipients of a message are specified and the message
text is transferred.
Select < SMTP Setup> from Network Setup menu and press ENTER; the
menu displays as follows.

1. Email via SMTP

2. SMTP Server
3. SMTP Port
4. SMTP Account
5. SMTP Password
Email via SMTP
This item enables the user to determine if the unit sends e-mail via SMTP.
Select <YES> to send e-mail via SMTP using direction keys; if not, select
<NO>.
74
nd th
to 4 item will be discussed in Network Restart section.
" symbol indicating that the designated
√
SMTP Setup
No
25
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
st
item
" symbol.
√