Time Display Mode; Date/Time Order; Daylight Saving Time Setup; Dst Start / End - Speco DVR-4TN User Manual

5.1.3.5

Time Display Mode

The user can choose to set the time format to <12 hour> or <24 hour>. Use
the UP / DOWN keys to change the format. The default setting is <12 hour>.
5.1.3.6

Date/Time Order

This item is used to set the order of Date/Time display to <Date First> or
<Time First>. Select this item and press ENTER, then use UP / DOWN keys
to change the setting.
5.1.3.7

Daylight Saving Time Setup

This menu is for people who live in certain regions to observe Daylight Saving
Time (DST).
Daylight Saving Time
Select <ON> to enable, or <OFF> to disable the function.
If the function is disabled, the DST Start/ End time and DST Bias will be
grayed out and cannot be accessed. If this function is enabled, the date/time
information will be shown on the screen with a DST icon when playing back
recorded video or searching video in the event list. "S" indicates summer time
and "W" indicates wintertime.

DST Start / End

These items are used to set the daylight saving duration. Use LEFT / RIGHT
to move the cursor to the next or previous field, UP / DOWN to change the
settings.

DST Bias

This item allows the user to set the amount of time to move forward from the
standard time for daylight saving time. Available options are <30>, <60>, <90>
and <120> minutes.
5.1.3.8

Network Time Protocol Setup

The submenu allows you to setup the Network Time Protocol (NTP) server, to
automatically synchronize your unit to fit the local time per hour, and to
manually synchronize the local time.
1. NTP Server
2. Automatically Time Sync
3. Manually Time Sync
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
Network Time Protocol Setup
Time.nist.gov
OFF
OFF
User's Manual
57