Speco DVR-4TN User Manual page 18

Triplex+ digital video recorder family with network/ddns video server
Hide thumbs Also See for DVR-4TN:
Table of Contents

Advertisement

Refer to
the Alarm I/O for the DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT.
IEEE1394 (for DVR-4TN/ 8TN/ 16TN only)
DVR-4TN/ 8TN/ 16TN series unit is equipped with two IEEE1394 (FireWire®)
ports for extended connections.
LAN 1000M (for DVR-16TS/ 16-TT only)
This port is for DVR-16TS/ 16-TT to connect to a NAS device.
Audio In/ Out
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit provides two channels of
audio recording and playback. The Audio In RCA connector is offered for
connecting an audio source device (e.g. external amplified microphone) to the
unit. The Audio Out RCA connector is available for connecting an audio output
device (e.g. amplified speakers) to the unit.
USB 2.0 (x4)
There are two USB2.0 ports in the rear panel and two in the front panel to
allow users to connect external USB devices to the unit, such as a
ThumbDrive
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit allows the user to preset
the OSD settings using a USB mouse.
LAN (RJ-45)
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit is capable of networking.
The LAN port allows the DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit to
access the network/ Internet through an Ethernet connection.
Power Supply
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit includes an AC power
connection jack. Please use the power supply cord that ships with the unit.
Power Switch
The power switch is used to power up or shut down the unit.
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
Appendix F: Alarm I/O Pin Definition
®
.
NOTE: Use of other power supply may cause overloading.
User's Manual
for detailed pin information on
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvr-8tnDvr-16tnDvr-16ttDvr-16ts

Table of Contents