Ezddns; Rs485 Setup; Baud Rate; Bits - Speco DVR-4TN User Manual

User's Manual

ezDDNS

ezDDNS enables the users to register for the host name automatically. Press
ENTER and select YES. The following screen will be displayed:
NOTE: The DVR must be connected to the *Real IP address, or be
assigned a specific port using **Port Forwarding technique.
*A "Real IP" is the IP address that is assigned to you by your ISP.
**A "Virtual IP" is the IP address assigned either manually or through
DHCP. When the user is assigned a Virtual IP, the user must use Port
Forwarding technique to assign a specific port to the DVR.
5.1.7

RS485 Setup

This menu allows the user to setup the parameters of the unit's RS-485
communications port. From the Main menu, select <RS485 Setup> and press
ENTER. The following menu is displayed.
1. Unit ID

2. Baud Rate

3. Bits

4. Stop
5. Parity
5.1.7.1 Unit ID
This item is used to change the RS-485 ID address of the unit. The ID is with
the range of <1> to <255>. The default is <224>.
5.1.7.2 Baud Rate
The Baud rate options for association with the protocol are <2400>, <4800>,
<9600>, <19200>, <38400> and <57600>. The default is <9600> baud.
5.1.7.3 Bits
The user can specify the bits in a word that are associated with this protocol.
The available options are <6>, <7> and <8> bits. The default is <8> bits.
78
ezDDNS Submit/update ok!
Host name is XXXX_XXXXXX
Press any key to return
RS485 Setup
224
9600
8
1
None
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08