Jog/Shuttle - Speco DVR-4TN User Manual

User's Manual
CHANNEL
• In both Live and Playback modes, press the CHANNEL key to view the
corresponding video in full screen. The number of the CHANNEL keys
corresponds to the number of cameras supported by the unit.
• In dome control mode, the key "1" is used to access the Set/ Go preset
menu; the key "2" is used to hide or display the dome setting parameters.
JOG/ SHUTTLE
The jog/ shuttle knob, shown in the figure below, is a combination of a shuttle
ring with an embedded jog disk, which is used to provide wide range in
playback control. Note that the jog/ shuttle knob is active only when the DVR
unit is in Playback mode.
• While playing back video, you can use the shuttle ring to select different
speeds of forward and backward playing. Rotating the shuttle ring causes
the unit to playback in fast forward/ backward playing speed. According to
the angle you rotate the shuttle ring, you can choose the playing speed
from 1×, 2×, 4×, 8×, 16×, and 32×, in both forward and reverse directions,
shown in the figure below:
22
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08