Host Name; Ddns Port; Submit/ Update - Speco DVR-4TN User Manual

Host Name

This item allows the user to setup a domain name, which is used when
entering the DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit through the
Internet on your remote PC.
To setup the Host Name of the unit, follow the steps.
• Select <Host Name> from DDNS Setup menu and press ENTER. A virtual
keyboard displays as shown.
• Use Direction keys to select a character.
• Press ENTER to add the selected character to the Host Name entry field.
• When done, move the cursor to <OK> and press ENTER to save the
settings and exit.

DDNS Port

This item allows the user to setup the port for DDNS. Press UP / DOWN
Direction keys to change the port.

Submit/ Update

When done, move the cursor to this item and press ENTER to submit the
settings.
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
A B C D E
N O P Q R
a b c d e
n o p q r
0 1 2 3 4
# − _
◄ ►
Cancel
NOTE: No any two DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series units
should be set to the same Host Name.
NOTE: If there are two DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series units
set with the same domain name, the later setting will not be submit
successfully.
Host Name
F G H I J K
S T U V W X
F g h i j k
S t u v w x
5 6 7 8 9
.
Backspace Delete
OK
L M
Y Z
l m
y z
! @
User's Manual
77