Alarm-Out - Speco D8RS User Manual

KEY TONE
REMOTE CONTROL ID
SENSOR

4-4-1. Alarm-Out

Item
ALARM OUT
SENSOR IN
MOTION ON
VIDEO LOSS ON
ALARM DURATION
ERROR ALARM
(9 – Highest sensitivity, 1 – Lowest sensitivity)
Enable/disable key tone.
Set the remote control ID.
1. Select ID.
2. Input the remote control ID number.
3. An icon will indicate on the Live Screen if the remote control ID is
synchronized.
The options are from 0 to 99
Select the type of each sensor.
Option is Off, Normal Open or Normal Close.
Figure 4.4.2. ALARM-OUT Setup Screen
Table 4.4.2. Item for ALARM-OUT Setup Screen
Only one Alarm-out is available.
Sensor input from 1 to 4.
Camera motion detection from 1 to 4.
Camera video loss detection from 1 to 4.
Set alarm dwell time from 5 to 60 seconds.
Set the error type for the alarm activation. The options are
OFF, ALL, HDD ERROR and VIDEO LOSS.
Description
27