Audio Output; Key Beep; Stop; Parity - Speco DVR-4TN User Manual

5.1.7.4

Stop

The user can specify the stop bit associated with this protocol. Options are
<1> and <2> stop bits. The default is <1> stop bit.
5.1.7.5

Parity

This item is used to specify the parity associated with this protocol. Options
are <ODD>, <EVEN>, and <NONE>. The default is <NONE>.
5.1.8

Audio Output

The item is used to set the audio output mode. The available options are as
listed as follows.
<Live/Playback>
Select this item to play the recording sounds of live image in live mode, and
sounds of recorded video in playback mode respectively.
<Always Live>
Select this item to play live sounds in both live mode and playback mode.
<OFF>
Select this item to disable the audio output function.
5.1.9

Key Beep

This item is used to enable or disable the key tone. Select <YES> to enable
the key tone, or <NO> to disable.
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
User's Manual
79