User's Manual
5.1.3.2
Time Zone
You can adjust the unit to the local time either by manually setting the date/
time and day light saving time, or by setting this item and let unit automatically
adjusts the two items mentioned above according to the time zone you select.
The default time zone is set to the "+8" area, please refer to the figure below
and select you local time zone.
5.1.3.3
Date / Time Display
Users are allowed to choose to set the Date / Time OSD displays in 1 or 2
rows. Use the UP / DOWN keys to change the setting. The default is to
display the date / time OSD in one row.
5.1.3.4
Date Display Mode
This function allows the user to set the OSD display type for the date / time.
There are three options to select from: <Y/M/D>, <M/D/Y> or <D/M/Y>. "Y"
represents "Year", "M" represents "Month" and "D" represents "Day".
Use UP / DOWN keys to change the setting. The default setting is <Y/M/D> in
both NTSC / PAL formats.
56
NOTE: After selecting the time zone, you MUST go to <Network Time
Protocol Setup>
time once, or the time zone setting will not be activated.
<Manually Time Sync> and synchronize the local
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08