Establishing Dial-Out Connection - Speco DVR-4TN User Manual

User's Manual
• Now the dial-in connection is established.

Establishing Dial-out Connection

The Dial-out function enables the user to establish dial-up modem communication to and
from the DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit for remote notification use. Follow
the instructions that follow to set up your DVR and PC.
DVR Configuration:
• Connect a USB modem to the USB port and connect a working phone line to the
modem.
• Press MENU and input the Administrator password to access the OSD Main menu.
Select <Network Setup> and then <Dial-out Setup> to set up the Dial-out settings.
• Select the <Email Address> in the Network Setup menu to edit an e-mail address
for alarm notification.
• Select <Event Setup> in the Main menu and set the Email Notice function to <ON>
(enabled).
• Exit the OSD menu and save the configuration.
• For more information on dial-out settings, see section 5.1.6.4 Dial-out Setup.
126
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08