Contrast; Saturation; Audio Association; Record Setup - Speco DVR-4TN User Manual

5.3.8

Contrast

Move the cursor to this item and press ENTER to adjust the contrast of the
camera. Use UP / DOWN keys to adjust the value.
5.3.9

Saturation

Move the cursor to this item and press ENTER to adjust the color saturation of
the camera using UP / DOWN keys. This value will be ignored on
monochrome monitors. The range of saturation values is <-128> to <127>.
The default setting is <0>.
5.3.10 Hue
Move the cursor to this item and press ENTER to adjust the hue of the camera.
Use UP / DOWN keys to adjust the value.
5.3.11

Audio Association

This item is used to establish the connection between the selected camera
and the two audio-in channels. Move the cursor to <Audio Association> in the
Camera Setup menu and press ENTER, then select <Both>, <Left Only>,
<Right Only> or <None> by UP / DOWN keys to set up the connection.
5.4

Record Setup

The following three factors will effect the total record time of the DVR-4TN/
8TN/ 16TN/ 16TS/ 16TT series unit:
• HDD capacity
• Recording rate (Picture per Second)
• Image quality settings
The greater the recording rate and the higher the quality setting, the shorter
the recording time. Most of the related factors can be set here in this submenu.
The Record Setup menu allows user to set recording quality, recording
schedules, and other recording parameters. Administrator's password is
required to access Record Setup menu. In the Main menu, move the cursor to
<Record Setup> and press ENTER. The following menu is displayed.
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
User's Manual
85